1. Design X86 CPU schematic & check PCB layout. ( Idaville) 2. Debug with other function engineers.( Switch Hardware, BIOS, BMC, CPLD, Diag) 3. Study new function for product. 4. Co-work with other teams for new function.

1.Discuss PCB stack-up with simulation team. 2.Check mainboard layout. (including equal lanes, design for Manufacture/Test.) 3.Confirm schematic to meet customer's requirement. 4.verify PCBA function. 5.Analysis the fail PCBA on pilot run stage or from customer. 6.Co-work with EA team. (DQA) 7.Check suitable connectors to meet customer's concept stage. 8. Board level test under Linux ( Ubuntu, Redhat...etc)

1. Find the suitable solution to meet PM/Customer's requirement. 2.Disscuss PCB stack-up with SI team. 3.Plan project schedule and verify the PCBA in pilot run stage. 4.Finish the schematic、layout. 5.Analysis the pilot run/customer's PCBA fail issue. 6.Create BOM and maintain EC. 7.wirte product user guide.

1. Find the suitable solution to meet PM/Customer's requirement. 2. Finish schematic 、check layout / component spec. 3. maintain BOM& EC. achievement: I took over someone else’s project and made it the fastest mass-produced project of whole BU.

1. proposal to customer, Cowork with mechanical、thermal、BIOS、EC team. including estimating cost. 2. Mainboard layout plan and check layout, equal lanes. (including meet factory's manufacture process /test fixtrue requirement. ) 3.Analysis PCBA/ assembly issue in pilot run stage. 4. verify board /system function. 5. maintain BOM&EC. Achievement: Analysis a corss-department issue and share the root case to HW. The issue was cased by power IC and explain buck switch architecture.

1. Test Plan for product test. ( base on product feather, prject satage.) 2.co-work with RD to debug. 3. Develop the new test fixture for product if need. achievement: 1. Develop a new fixture to separate PCIe card and system. Tester can heat the PCIe card to 60℃.