CakeResume 找人才
進階搜尋
On
4 到 6 年
6 到 10 年
10 到 15 年
15 年以上
曾任
Electrical Maintenance @PT. Pabrik Kertas Tjiwi Kimia Tbk.2021 ~ 2023
・
Engineer
一個月內
in preparation for when there is a tool has problem or automation project Education Politeknik Perkapalan Negeri Surabaya Automation Engineering,GPASkill Preventive Maintenance ( Preparing weekly, monthly summary, and exception reports ) AC / DC Drive Wiring Diagram ( AUTOCAD, EPLAN P8 Electrical ) PLC and HMI Programming SCADA, Power Inverter Project and People Management Electrical Troubleshooting Computerized Maintenance Management Systems (CMMS) Data Analysis and Visualization Machine Learning Certification Data Science and Machine Learning - Purwadhika Digital Technology SchoolPurwadhikaSystem 800xA with AC 800M Hardware Maintenance and Troubleshooting - ABBInstrument Inspector level 2 - Inspector TrainingInstrument Inspector level 1 - Inspector TrainingPLC Intermediate Engineer - PPNSIndustrial Automation System Design - BNSP
待業中
・
正在積極求職中
全職 / 暫不考慮遠端工作
4 到 6 年
Politeknik Perkapalan Negeri Surabaya
・
Automation Engineering
Application Administrator & Developer @Co-op Refinery Complex2020 ~ 現在
・
Application Administrator & Developer
超過一年
Kendra Cunningham Software Engineer with ten plus years of web application experience, ten years of software engineering experience and ten years of contributing to software development life cycle improvements. Work Experience Application Administrator & Developer • Co-op Refinery Complex JulyPresent Develop, configure, monitor and maintain an extensive industrial application catalog and various integrations (JDE CMMS, Lenel OnGuard, E2G Plant Manager, Emerson AMS, L&J WINGauge, DCS) Scripting, scheduling and updating virtual deployments, monitoring and backups Administration and configuration of application server infrastructure Providing data, reports and applications to business enabling units Network Systems Analyst • Co-op Refinery Complex JanuaryJuly 2020
全職 / 我只想遠端工作
10 到 15 年
University of Regina
・
Bachelor of Applied Science , Software Systems Engineering曾任
Senior QA engineer @DeepHow2023 ~ 現在
・
QA automation engineer / Software development engineer in test
一個月內
待業中
・
正在積極求職中
全職 / 對遠端工作有興趣
6 到 10 年
國立中山大學 National Sun Yat-Sen University
・
應用數學系 統計組就職中
・
正在積極求職中
全職 / 暫不考慮遠端工作
6 到 10 年
元智大學
・
資訊工程
曾任
Frontend Engineering Manager, Data Science @Vpon Big Data Group2022 ~ 2023
・
Frontend Engineer, Full Stack Engineer
一個月內
Yuchun Lai Frontend Engineer Taipei City, Taiwan [email protected] over a decade of development experience, I've executed over a hundred projects, including official website with CMS, online games, etc. I also have experience in building a large-scale data platform from scratch. In addition to CSS , JavaScript , and React proficiency, I have backend experience with Node.js and VB.NET, along with strong UI/UX knowledge. This facilitates effective communication with cross-disciplinary partners and comprehensive system planning. Over the past two years as a manager, I've implemented
待業中
・
正在積極求職中
全職 / 對遠端工作有興趣
10 到 15 年
YZU University (元智大學)
・
Information Communication
.Net 資深工程師 @澳創科技2022 ~ 現在
・
C#.net Development 全端/後端工程師
一個月內
行為分析與網站表現評估，支持SEO策略制定。 2. 資安強化措施： 配置WAF並根據Owasp 10原則優化Nginx設置，增強網站安全性。 3. CMS功能擴展： 為CMS後台開發自定義Meta欄位功能，支持更細部的SEO優化。 .NET開發工程師 • 遠通電收股份有限公司 十一月十月
就職中
・
正在積極求職中
全職 / 對遠端工作有興趣
4 到 6 年
文化大學
曾任
前端工程師 @Asus 華碩電腦股份有限公司2023 ~ 2023
・
前端工程師 Front-End Developer
一個月內
用，在抽象化的同時，避免複雜元件 Prop drilling 的問題產生。 統整、撰寫 UI 元件庫的開發規範文件。 製作、維護在 NX monorepo 中，以 React 開發的各 CMS 站台。 透過抽出 Routing Layer，減少不必要的重新渲染及解決路由重造問題。 前端工程師 Aidmics Biotechnology 億觀生物科技 • 四月十月 2022 使用 React 開
待業中
・
正在積極求職中
全職 / 對遠端工作有興趣
4 到 6 年
逢甲大學
・
光電系
就職中
・
正在積極求職中
全職 / 對遠端工作有興趣
6 到 10 年
Tamkang University (TKU)
・
資訊工程學系
Cloud Services Manager @AIA2021 ~ 2022
・
DevOps Engineer, Site Reliability Engineer
一個月內
PGsql Manage the overall design and implementation of secure, scalable, and fault-tolerant infrastructure Managing and Automating Infrastructure Using Terraform, Terragrunt and Go Scripting. Deploying and Managing K8s clusters on Multi-Tenant and Dedicated Environments Managing and Administrating PostgreSQL Databases on EKS Postgres S3 data backup & replication setup (CRR) KMS/Secrets replication setup (CMS) Monitoring - Infra, Application dashboards, postgres using Prometheus, Thanos and Grafana Alerting - Infra, Application using Opsgenie, Uptrends and Cloudwatch Monitoring system, application health, security controls & cost Using Prometheus and Vantage Managing VPC, Subnets, NACL, SGs, KMS, CertManager, Secretsmanger, IAM role review Logs...
就職中
・
正在積極求職中
全職 / 對遠端工作有興趣
10 到 15 年
Sikkim Manipal University
・
Information Technology最輕量、快速的招募方案，數百家企業的選擇
搜尋履歷，主動聯繫求職者，提升招募效率。
- 瀏覽所有搜尋結果
- 每日可無限次數開啟陌生對話
- 搜尋僅開放付費企業檢視的履歷
- 檢視使用者信箱 & 電話
搜尋技巧
1
嘗試搜尋最精準的關鍵字組合
資深 後端 php laravel
2
將須完全符合的字詞放在雙引號中
"社群行銷"
3
在不想搜尋到的字詞前面加上減號，如果想濾掉中文字，需搭配雙引號使用 (-"人資")
UI designer -UX
職場能力評價定義
專業技能
該領域中具備哪些專業能力（例如熟悉 SEO 操作，且會使用相關工具）。
問題解決能力
能洞察、分析問題，並擬定方案有效解決問題。
變通能力
遇到突發事件能冷靜應對，並隨時調整專案、客戶、技術的相對優先序。
溝通能力
有效傳達個人想法，且願意傾聽他人意見並給予反饋。
時間管理能力
了解工作項目的優先順序，有效運用時間，準時完成工作內容。
團隊合作能力
具有向心力與團隊責任感，願意傾聽他人意見並主動溝通協調。
領導力
專注於團隊發展，有效引領團隊採取行動，達成共同目標。
專業背景
目前狀態
就職中
求職階段
目前沒有興趣尋找新的機會
專業
軟體工程師, 機器學習工程師, C/C++ 開發人員
產業
軟體, 醫療器材
工作年資
6 到 10 年
管理經歷
無
技能
語言能力
Chinese
・
母語或雙語
求職偏好
希望獲得的職位
AI 深度學習 軟體開發
預期工作模式
全職
期望的工作地點
台灣
遠端工作意願
對遠端工作有興趣
接案服務
否
學歷
學校
國立台灣大學
主修科系
物理研究所
張維麟
- 我是宜蘭羅東人，熱愛戶外活動。喜歡騎公路車、登山、跑步、打羽球、排球。另外，也常常玩桌遊或益智遊戲。
- 我喜歡閱讀。藉由閱讀多種領域的書籍，來學習新知識、拓展想像力。圖書館和書店是我最常出現的場所。軟體相關的書有：Dive into Deep Learning、Effective C++、Modern C++、深入淺出設計模式等書。
- 我十分擅長透過數學工具描繪物理現象，這也是我當初選擇就讀物理系的原因。
- 也會透過網路影片與文章學習，以精進演算法與深度學習等領域的新知。偶爾會在LeetCode腦力激盪。
- 我享受寫程式時思維碰撞的感覺。透過邏輯思考與流程規劃完成模型架構，從龐大數據抽取資訊特徵，這和學物理時、由基本定理來描述世界的過程非常相似。
人工智慧工程師, 深度學習工程師, 演算法工程師, 軟體工程師
Taipei，TW
[email protected]
技能
物理學
- 物理學
- 天文學
- 光學
- 電磁學
- 調頻飛秒脈衝雷射光源
- 共軛焦顯微鏡
- 雙光子螢光顯微鏡
- 二倍頻顯微鏡
- 干涉式顯微鏡
- 牛頓式天文望遠鏡
程式語言
- C
- C++
- Assembly
- Python
- TensorFlow/Keras
- PyTorch
- OpenCV
- Shell
- Matlab
- LabVIEW
- VBA
演算法
- 數位音訊/影像處理
- 傅立葉分析
- IIR/FIR filter：全通濾波、希爾伯特轉換、等化器
- 動態範圍壓縮
- 亂數生成
- 粒子影像定位
- DNN/CNN模型：人聲分離、背景降噪
- LSTM / word2vec / Seq2seq：文本生成
- Saliency Maps特徵擷取
- 網路爬蟲
工作經歷
亞迪電子, 演算法工程師, Jul 2020 ~ 現在
- 我現職為亞迪電子擔任演算法開發工程師。亞迪電子關鍵技術以「熱像鏡頭」結合「自我注入鎖定式雷達」(2.4GHz的微波雷達，簡稱SIL雷達)為核心，應用於醫療照護、防疫、畜牧業等產業。我的工作有：
- 基於QT框架編寫標記GUI工具，為敝公司的SIL雷達生成的一維波形數據(簡稱SIL數據)建立標記程序。
- 以生成對抗模型(IWGAN)為SIL數據進行數據增強。
- 以C++開發第一代產品的演算法，由SIL數據推算病人的呼吸與心跳等生命特徵。
- 以機器學習、深度學習，如random forest、CNN、LSTM等模型開發第二代產品，由SIL數據推斷病人病徵的分類模型。
- 以OpenCV、YOLO開發熱影像姿態辨識系統。
- 在Windows與Linux系統之間透過LAN建立Client–Server model架構，透過個人電腦從多台Linux裝置即時取得SIL數據。
- 在Windows與Linux伺服器之間編寫Bash與PowerShell，進行演算法安裝與數據收集。
- 以SMAC步進馬達模擬病人與受照護者的呼吸與心跳之運動。
- 尋找合適的測距雷達解決方案，設計病人與受照護者的姿態偵測與跌倒偵測功能。
元鼎音訊, 軟體工程師, May 2016 ~ Jun 2020
- 我曾在元鼎音訊擔任軟體工程師。公司以音訊產品：藍芽耳機與助聽器，著力於聽力健康的發展。主要工作內容有：
- 與IC商和方案商三方合作，從事CSR8670與AB1539/T等藍芽晶片的開發。
- 以C++/Python進行演算法開發，如下：
- 語音增強：VAD、LRT、音訊降噪、超低音移頻
- 聽力保護：EQ、DRC、雙耳拍音生成
- 自然聲隨機生成：亂數、白噪聲、水滴物理學等。
- 在DSP晶片上以C語言或組合語言實現演算法，由浮點數運算轉換為定點數運算。
- 在MCU晶片協助編寫系統的信息流程控制，對不同算法排程，避免衝突。
廣達電腦, 射頻工程師, Nov 2014 ~ May 2016
- 我的主要工作內容為協助客戶進行射頻元件開發。 我時常與客戶一同進行射頻實驗，在實驗室與生產線找出最佳的產品規格。
- 撰寫、維護自動化測試程式，進行儀器控制與數據分析。
- 改善良率、收集數據、並對生產線進行標準化。
- 協助客戶進行測試實驗、試產，提出結果報告。
- 我在工作期間時常需要往返中國蘇州地區的生產線支援測試。這段期間，我認識許多中國朋友，透過與他們溝通與相處，我了解中國觀點、也與他們分享台灣經驗。
- 此外，也會到美國舊金山協助客戶進行產品開發。趁這難得的經驗，更是貼近並深刻地接受了蘋果公司的文化洗禮。這段期間的所見所聞，是我人生中寶貴的經歷。
中央研究院, 研究助理, Jul 2013 ~ Apr 2014
- 退伍後，我加入中央研究院謝佳龍老師的實驗室。
- 由於研究內容橫跨物理、化學、生醫領域，在這裡除了發揮原先的光學專長，我還需要學習生物化學實驗與儀器控制，才能建立一套完整的光學顯微影像系統。
- 我獨自設計干涉式散射光學顯微鏡(iSCAT)。 以干涉式散射光學顯微鏡，建立生物膜奈米粒子影像。
- 利用CMOS高速攝影機(1k~100k fps)、影像擷取卡，對細胞膜分子影像每張圖上的粒子定位，並追蹤超快速動態軌跡。
- 透過大量的動態軌跡數據，分析出細胞膜物理特性。
- 與同事、老師一同將研究成果發表在Optics Express的期刊論文，在此收穫良多。 http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-8-9159
學歷
國立台灣大學, 碩士學位, 物理研究所, 2009 ~ 2012
- 我碩士班時加入朱士維老師的生醫光學實驗室，我們是結合物理、光電與生物等學科的跨領域研究團隊。
- 我們與中研院、清大、陽明、逢甲、大阪大學等地多次進行合作計畫。
- 我碩士班從事非線性光學的研究。透過非線性晶體、光子晶體光纖，建立調頻飛秒脈衝雷射光源。
- 期望結合超解析度螢光顯微鏡、非線性光學顯微鏡，可以廣泛運用在非侵入式3D生醫影像上。
- 我曾擔任光學和物理的大學課程助教。引導學生糾錯、學習，出題並訂正考卷。我們還設計了許多日常生活中、關於光的趣味教學演示實驗。
- 我的指導老師十分重視學生對研究計畫的安排與發表。他認為無法清楚敘述自己的研究內容時，意味著對研究的了解不夠透徹。這改變了我對學習的看法。
- 在這裡，我學到的不僅僅是物理上的知識，還有學問的態度與探索世界的好奇心。
國立成功大學, 學士學位, 物理學系, 2005 ~ 2009
- 我加入「電漿與太空科學中心」的電漿微波探測計畫，致力開發應用於太空環境量測的儀器。
- 透過軟體模擬天線與傳輸線的結構、計算探測器的頻譜與傳輸效率。
- 藉由高頻微波對電漿粒子的交互作用，觀察電漿的物理特性。
- 大學修課期間，修過許多系內、系外各式必選修，因為我喜歡吸收不同類型的知識。印象最深刻、最喜愛的課程有：天文學、廣義相對論、大腦的功能、世界音樂、越南社會與文化等課程。
- 課堂之外，也曾積極參加社團活動，曾參加系學會、系羽球隊、蘭友會、流舞社、羽球社等社團活動。
- 妥善的時間規劃與安排，使得我在課業與社團方面都有不錯的表現。
Chang Wei-Lin
- I'm from Taiwan, Yilan. I love outdoor activities, include riding a road bike, climbing, running, playing badminton, volleyball. I also love playing board games and puzzle games.
- I like reading. I like to learn new knowledge and expand my imagination by reading books in various fields. Libraries and bookstores are my most frequently visited places. I have read Dive into Deep Learning, Effective C++, Modern C++, Head First Design Patterns, etc.
- I am very good at describing physical phenomena through mathematical tools. This is why I chose to study Physics.
- I will also learn about the latest algorithms and machine learning through online videos and articles. Have tried to implement several audio and text related projects.
- I enjoy brainstorming when learning deep learning and algorithms. Architectural model, mining information features from big data, is very similar to the process of describing the world by basic theorem when learning physics.
Artificial intelligence engineer, Deep learning engineer, Algorithm engineer, Software engineer
Taipei，TW
[email protected]
Skill
Physics
- Physics
- Astronomy
- Optics
- Electromagnetism
- Tunable femtosecond pulsed laser
- Confocal microscopy
- 2-photon excitation microscopy
- Harmonic imaging microscopy
- Nano-particle scattering microscopy
- Newtonian telescope
Programming
- C
- C++
- Assembly
- Python
- TensorFlow/Keras
- PyTorch
- OpenCV
- Shell
- Matlab
- LabVIEW
- VBA
Algorithms
- Digital audio / image processing
- Fourier analysis
- Dynamic range compression
- IIR / FIR digital filtering: All-pass filter, Hilbert transform, EQ
- Random number generation
- DNN/CNN: human voice separation, background noise reduction
- LSTM / word2vec / Seq2seq: text generation
- Saliency Maps feature extraction
- Web crawlers
Experience
Algorithm Engineer, ADE Technology Inc.｜2020/7~now
- I am currently working as an algorithm engineer for ADE Technology Inc. Combine “thermal camera” and “Self-Injection Locked (SIL) radar”, and applies in medical care, epidemic prevention, animal husbandry and other industries. My tasks are:
- Write the labeling GUI tool based on the QT framework, and establish a labeling process for 1D-waveform data generated by us SIL radar (SIL data).
- Data augmentation with generative adversarial model (IWGAN) for SIL data.
- The algorithm of the 1st-gen product is developed in C++ to calculate the patient's vital sign such as breathing and heartbeat from the SIL data.
- Develop 2nd-gen products with machine learning, deep learning, such as random forest, CNN, LSTM, to infer a classification model of patient symptoms from SIL data.
- Developed thermal image pose recognition system with OpenCV and YOLO.
- Establish client-server model between Windows and Linux systems through LAN, and Real-time acquisition of SIL data from multiple Linux devices via a PC.
- Write Bash and PowerShell between Windows and Linux servers for algorithm installation and data collection.
- Use a SMAC step motor to simulate the movement of the patient's respiratory and heartbeat.
- Looking for a suitable range-finding radar solution, designing the posture detection and fall detection functions of patients and care recipients.
Software Engineer, UnlimiterHear Co., Ltd｜2016/5~2020/6
- I worked as a software engineer for UnlimiterHear. We focuses on the healthy development of hearing with audio products: Bluetooth headsets and hearing aids.
- I cooperated with IC vendors and developed Bluetooth chips, such as CSR8670 and AB1539/T.
- I developed algorithms in C++/Python as follows:
- Speech enhancement: VAD, LRT, noise cancellation, subwoofer tune.
- Hearing protection: EQ, DRC, binaural beat generation
- Natural noise random generation: random number, white noise, droplet physics
- The algorithm is implemented in C/Assembly on the DSP chip, and the floating-point number operation is converted into a fixed-point number operation.
- Write the message flow control of the system in the MCU, schedule the algorithm to avoid conflicts.
RF Engineer, Multimedia BU, Quanta Computer Inc.｜2014/11 ~ 2016/5
- My main job is to assist customers in the development of RF components. I often conduct RF experiments with customers to find the best product specifications in the laboratory and production line.
- Write and maintain programs for instrument control, automated test and data analysis.
- Improve yield, collect data, and standardize production lines.
- Assist customers to conduct test experiments, trial production, and submit results reports.
- During my work, I often need to travel to and from the production line in Suzhou, China to support testing. During this period, I met many Chinese friends. Through communication and getting along with them, I understood Chinese views and shared Taiwan's experience.
- In addition, he will also go to San Francisco to assist customers in product development. Taking advantage of this rare experience, it is close to and deeply accepted the cultural baptism of Apple. What I saw and heard during this period was a precious experience in my life.
RA, Institute of Atomic and Molecular Sciences, Academia Sinica｜2013/7 ~ 2014/4
- After leaving the army, my first job entered the lab of Dr. Chia-Lung Hsieh of the Academia Sinica.
- Since the research covers the fields of physics, chemistry and biomedicine, in addition to using my original optical expertise, I also need to learn biochemical experiments and instrument control to build a optical microscopic imaging system.
- I built an interferometric scattering optical microscope (iSCAT) alone.
- Use a CMOS high-speed camera (1k ~ 100k fps) and an frame grabber device to positioning nano-particles, and track the ultra-fast dynamic trajectory of cell membrane.
- Through a large amount of dynamic trajectory data, the physical characteristics of the cell membrane were analyzed.
- I published research results in Optics Express journal papers with colleagues and teachers, and I learned a lot here. http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-8-9159
Education
NTU, Institute of Physics, Master｜2009/9 ~ 2012/6
- When I was studying for a master's degree, I joined Prof. Shi-Wei Chu's "Bio-Optics Lab". We are a cross-disciplinary research team that combines physics, optics and biology.
- We cooperate with Academia Sinica, NTHU, NYMU, FCU and Osaka University.
- In my master's degree, I was engaged in the research of nonlinear optics. The tunable femtosecond pulse laser light source is established through nonlinear crystal and photonic crystal fiber.
- Combined with super-resolution fluorescent microscope and nonlinear optical microscope, it is expected to be used in non-invasive 3D bio-imaging.
- I used to be a teaching assistant for university courses in optics and physics. Guide students to correct errors, study, issue questions and revise examination papers.
- We also designed many interesting teaching demonstration experiments about light in daily life.
NCKU, Department of Physics, Bachelor｜2005/9 ~ 2009/6
- I joined the plasma plasma microwave detection project of the "Plasma and Space Science Center" to develop instruments for space environment measurement.
- By simulating the structure of the antenna and the transmission line, the spectrum and transmission efficiency of the detector are calculated.
- Through the interaction of high-frequency microwave on plasma particles, observe the physical properties of plasma.
- I have taken many courses, both inside and outside the department, because I like to learn all kinds of knowledge. The most impressive and favorite courses are: astronomy, general relativity, brain function, world music, Vietnamese society and culture and other courses.
- Outside of the classroom, I have also actively participated in clubs and participated in club activities such as the Student Union, the Badminton Team, the Yilan Alumni Club, and the Pop Dance Club.
- With proper time planning and arrangement, I have a good performance in my studies and clubs.
張維麟
- 我是宜蘭羅東人，熱愛戶外活動。喜歡騎公路車、登山、跑步、打羽球、排球。另外，也常常玩桌遊或益智遊戲。
- 我喜歡閱讀。藉由閱讀多種領域的書籍，來學習新知識、拓展想像力。圖書館和書店是我最常出現的場所。軟體相關的書有：Dive into Deep Learning、Effective C++、Modern C++、深入淺出設計模式等書。
- 我十分擅長透過數學工具描繪物理現象，這也是我當初選擇就讀物理系的原因。
- 也會透過網路影片與文章學習，以精進演算法與深度學習等領域的新知。偶爾會在LeetCode腦力激盪。
- 我享受寫程式時思維碰撞的感覺。透過邏輯思考與流程規劃完成模型架構，從龐大數據抽取資訊特徵，這和學物理時、由基本定理來描述世界的過程非常相似。
人工智慧工程師, 深度學習工程師, 演算法工程師, 軟體工程師
Taipei，TW
[email protected]
技能
物理學
- 物理學
- 天文學
- 光學
- 電磁學
- 調頻飛秒脈衝雷射光源
- 共軛焦顯微鏡
- 雙光子螢光顯微鏡
- 二倍頻顯微鏡
- 干涉式顯微鏡
- 牛頓式天文望遠鏡
程式語言
- C
- C++
- Assembly
- Python
- TensorFlow/Keras
- PyTorch
- OpenCV
- Shell
- Matlab
- LabVIEW
- VBA
演算法
- 數位音訊/影像處理
- 傅立葉分析
- IIR/FIR filter：全通濾波、希爾伯特轉換、等化器
- 動態範圍壓縮
- 亂數生成
- 粒子影像定位
- DNN/CNN模型：人聲分離、背景降噪
- LSTM / word2vec / Seq2seq：文本生成
- Saliency Maps特徵擷取
- 網路爬蟲
工作經歷
亞迪電子, 演算法工程師, Jul 2020 ~ 現在
- 我現職為亞迪電子擔任演算法開發工程師。亞迪電子關鍵技術以「熱像鏡頭」結合「自我注入鎖定式雷達」(2.4GHz的微波雷達，簡稱SIL雷達)為核心，應用於醫療照護、防疫、畜牧業等產業。我的工作有：
- 基於QT框架編寫標記GUI工具，為敝公司的SIL雷達生成的一維波形數據(簡稱SIL數據)建立標記程序。
- 以生成對抗模型(IWGAN)為SIL數據進行數據增強。
- 以C++開發第一代產品的演算法，由SIL數據推算病人的呼吸與心跳等生命特徵。
- 以機器學習、深度學習，如random forest、CNN、LSTM等模型開發第二代產品，由SIL數據推斷病人病徵的分類模型。
- 以OpenCV、YOLO開發熱影像姿態辨識系統。
- 在Windows與Linux系統之間透過LAN建立Client–Server model架構，透過個人電腦從多台Linux裝置即時取得SIL數據。
- 在Windows與Linux伺服器之間編寫Bash與PowerShell，進行演算法安裝與數據收集。
- 以SMAC步進馬達模擬病人與受照護者的呼吸與心跳之運動。
- 尋找合適的測距雷達解決方案，設計病人與受照護者的姿態偵測與跌倒偵測功能。
元鼎音訊, 軟體工程師, May 2016 ~ Jun 2020
- 我曾在元鼎音訊擔任軟體工程師。公司以音訊產品：藍芽耳機與助聽器，著力於聽力健康的發展。主要工作內容有：
- 與IC商和方案商三方合作，從事CSR8670與AB1539/T等藍芽晶片的開發。
- 以C++/Python進行演算法開發，如下：
- 語音增強：VAD、LRT、音訊降噪、超低音移頻
- 聽力保護：EQ、DRC、雙耳拍音生成
- 自然聲隨機生成：亂數、白噪聲、水滴物理學等。
- 在DSP晶片上以C語言或組合語言實現演算法，由浮點數運算轉換為定點數運算。
- 在MCU晶片協助編寫系統的信息流程控制，對不同算法排程，避免衝突。
廣達電腦, 射頻工程師, Nov 2014 ~ May 2016
- 我的主要工作內容為協助客戶進行射頻元件開發。 我時常與客戶一同進行射頻實驗，在實驗室與生產線找出最佳的產品規格。
- 撰寫、維護自動化測試程式，進行儀器控制與數據分析。
- 改善良率、收集數據、並對生產線進行標準化。
- 協助客戶進行測試實驗、試產，提出結果報告。
- 我在工作期間時常需要往返中國蘇州地區的生產線支援測試。這段期間，我認識許多中國朋友，透過與他們溝通與相處，我了解中國觀點、也與他們分享台灣經驗。
- 此外，也會到美國舊金山協助客戶進行產品開發。趁這難得的經驗，更是貼近並深刻地接受了蘋果公司的文化洗禮。這段期間的所見所聞，是我人生中寶貴的經歷。
中央研究院, 研究助理, Jul 2013 ~ Apr 2014
- 退伍後，我加入中央研究院謝佳龍老師的實驗室。
- 由於研究內容橫跨物理、化學、生醫領域，在這裡除了發揮原先的光學專長，我還需要學習生物化學實驗與儀器控制，才能建立一套完整的光學顯微影像系統。
- 我獨自設計干涉式散射光學顯微鏡(iSCAT)。 以干涉式散射光學顯微鏡，建立生物膜奈米粒子影像。
- 利用CMOS高速攝影機(1k~100k fps)、影像擷取卡，對細胞膜分子影像每張圖上的粒子定位，並追蹤超快速動態軌跡。
- 透過大量的動態軌跡數據，分析出細胞膜物理特性。
- 與同事、老師一同將研究成果發表在Optics Express的期刊論文，在此收穫良多。 http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-8-9159
學歷
國立台灣大學, 碩士學位, 物理研究所, 2009 ~ 2012
- 我碩士班時加入朱士維老師的生醫光學實驗室，我們是結合物理、光電與生物等學科的跨領域研究團隊。
- 我們與中研院、清大、陽明、逢甲、大阪大學等地多次進行合作計畫。
- 我碩士班從事非線性光學的研究。透過非線性晶體、光子晶體光纖，建立調頻飛秒脈衝雷射光源。
- 期望結合超解析度螢光顯微鏡、非線性光學顯微鏡，可以廣泛運用在非侵入式3D生醫影像上。
- 我曾擔任光學和物理的大學課程助教。引導學生糾錯、學習，出題並訂正考卷。我們還設計了許多日常生活中、關於光的趣味教學演示實驗。
- 我的指導老師十分重視學生對研究計畫的安排與發表。他認為無法清楚敘述自己的研究內容時，意味著對研究的了解不夠透徹。這改變了我對學習的看法。
- 在這裡，我學到的不僅僅是物理上的知識，還有學問的態度與探索世界的好奇心。
國立成功大學, 學士學位, 物理學系, 2005 ~ 2009
- 我加入「電漿與太空科學中心」的電漿微波探測計畫，致力開發應用於太空環境量測的儀器。
- 透過軟體模擬天線與傳輸線的結構、計算探測器的頻譜與傳輸效率。
- 藉由高頻微波對電漿粒子的交互作用，觀察電漿的物理特性。
- 大學修課期間，修過許多系內、系外各式必選修，因為我喜歡吸收不同類型的知識。印象最深刻、最喜愛的課程有：天文學、廣義相對論、大腦的功能、世界音樂、越南社會與文化等課程。
- 課堂之外，也曾積極參加社團活動，曾參加系學會、系羽球隊、蘭友會、流舞社、羽球社等社團活動。
- 妥善的時間規劃與安排，使得我在課業與社團方面都有不錯的表現。
Chang Wei-Lin
- I'm from Taiwan, Yilan. I love outdoor activities, include riding a road bike, climbing, running, playing badminton, volleyball. I also love playing board games and puzzle games.
- I like reading. I like to learn new knowledge and expand my imagination by reading books in various fields. Libraries and bookstores are my most frequently visited places. I have read Dive into Deep Learning, Effective C++, Modern C++, Head First Design Patterns, etc.
- I am very good at describing physical phenomena through mathematical tools. This is why I chose to study Physics.
- I will also learn about the latest algorithms and machine learning through online videos and articles. Have tried to implement several audio and text related projects.
- I enjoy brainstorming when learning deep learning and algorithms. Architectural model, mining information features from big data, is very similar to the process of describing the world by basic theorem when learning physics.
Artificial intelligence engineer, Deep learning engineer, Algorithm engineer, Software engineer
Taipei，TW
[email protected]
Skill
Physics
- Physics
- Astronomy
- Optics
- Electromagnetism
- Tunable femtosecond pulsed laser
- Confocal microscopy
- 2-photon excitation microscopy
- Harmonic imaging microscopy
- Nano-particle scattering microscopy
- Newtonian telescope
Programming
- C
- C++
- Assembly
- Python
- TensorFlow/Keras
- PyTorch
- OpenCV
- Shell
- Matlab
- LabVIEW
- VBA
Algorithms
- Digital audio / image processing
- Fourier analysis
- Dynamic range compression
- IIR / FIR digital filtering: All-pass filter, Hilbert transform, EQ
- Random number generation
- DNN/CNN: human voice separation, background noise reduction
- LSTM / word2vec / Seq2seq: text generation
- Saliency Maps feature extraction
- Web crawlers
Experience
Algorithm Engineer, ADE Technology Inc.｜2020/7~now
- I am currently working as an algorithm engineer for ADE Technology Inc. Combine “thermal camera” and “Self-Injection Locked (SIL) radar”, and applies in medical care, epidemic prevention, animal husbandry and other industries. My tasks are:
- Write the labeling GUI tool based on the QT framework, and establish a labeling process for 1D-waveform data generated by us SIL radar (SIL data).
- Data augmentation with generative adversarial model (IWGAN) for SIL data.
- The algorithm of the 1st-gen product is developed in C++ to calculate the patient's vital sign such as breathing and heartbeat from the SIL data.
- Develop 2nd-gen products with machine learning, deep learning, such as random forest, CNN, LSTM, to infer a classification model of patient symptoms from SIL data.
- Developed thermal image pose recognition system with OpenCV and YOLO.
- Establish client-server model between Windows and Linux systems through LAN, and Real-time acquisition of SIL data from multiple Linux devices via a PC.
- Write Bash and PowerShell between Windows and Linux servers for algorithm installation and data collection.
- Use a SMAC step motor to simulate the movement of the patient's respiratory and heartbeat.
- Looking for a suitable range-finding radar solution, designing the posture detection and fall detection functions of patients and care recipients.
Software Engineer, UnlimiterHear Co., Ltd｜2016/5~2020/6
- I worked as a software engineer for UnlimiterHear. We focuses on the healthy development of hearing with audio products: Bluetooth headsets and hearing aids.
- I cooperated with IC vendors and developed Bluetooth chips, such as CSR8670 and AB1539/T.
- I developed algorithms in C++/Python as follows:
- Speech enhancement: VAD, LRT, noise cancellation, subwoofer tune.
- Hearing protection: EQ, DRC, binaural beat generation
- Natural noise random generation: random number, white noise, droplet physics
- The algorithm is implemented in C/Assembly on the DSP chip, and the floating-point number operation is converted into a fixed-point number operation.
- Write the message flow control of the system in the MCU, schedule the algorithm to avoid conflicts.
RF Engineer, Multimedia BU, Quanta Computer Inc.｜2014/11 ~ 2016/5
- My main job is to assist customers in the development of RF components. I often conduct RF experiments with customers to find the best product specifications in the laboratory and production line.
- Write and maintain programs for instrument control, automated test and data analysis.
- Improve yield, collect data, and standardize production lines.
- Assist customers to conduct test experiments, trial production, and submit results reports.
- During my work, I often need to travel to and from the production line in Suzhou, China to support testing. During this period, I met many Chinese friends. Through communication and getting along with them, I understood Chinese views and shared Taiwan's experience.
- In addition, he will also go to San Francisco to assist customers in product development. Taking advantage of this rare experience, it is close to and deeply accepted the cultural baptism of Apple. What I saw and heard during this period was a precious experience in my life.
RA, Institute of Atomic and Molecular Sciences, Academia Sinica｜2013/7 ~ 2014/4
- After leaving the army, my first job entered the lab of Dr. Chia-Lung Hsieh of the Academia Sinica.
- Since the research covers the fields of physics, chemistry and biomedicine, in addition to using my original optical expertise, I also need to learn biochemical experiments and instrument control to build a optical microscopic imaging system.
- I built an interferometric scattering optical microscope (iSCAT) alone.
- Use a CMOS high-speed camera (1k ~ 100k fps) and an frame grabber device to positioning nano-particles, and track the ultra-fast dynamic trajectory of cell membrane.
- Through a large amount of dynamic trajectory data, the physical characteristics of the cell membrane were analyzed.
- I published research results in Optics Express journal papers with colleagues and teachers, and I learned a lot here. http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-8-9159
Education
NTU, Institute of Physics, Master｜2009/9 ~ 2012/6
- When I was studying for a master's degree, I joined Prof. Shi-Wei Chu's "Bio-Optics Lab". We are a cross-disciplinary research team that combines physics, optics and biology.
- We cooperate with Academia Sinica, NTHU, NYMU, FCU and Osaka University.
- In my master's degree, I was engaged in the research of nonlinear optics. The tunable femtosecond pulse laser light source is established through nonlinear crystal and photonic crystal fiber.
- Combined with super-resolution fluorescent microscope and nonlinear optical microscope, it is expected to be used in non-invasive 3D bio-imaging.
- I used to be a teaching assistant for university courses in optics and physics. Guide students to correct errors, study, issue questions and revise examination papers.
- We also designed many interesting teaching demonstration experiments about light in daily life.
NCKU, Department of Physics, Bachelor｜2005/9 ~ 2009/6
- I joined the plasma plasma microwave detection project of the "Plasma and Space Science Center" to develop instruments for space environment measurement.
- By simulating the structure of the antenna and the transmission line, the spectrum and transmission efficiency of the detector are calculated.
- Through the interaction of high-frequency microwave on plasma particles, observe the physical properties of plasma.
- I have taken many courses, both inside and outside the department, because I like to learn all kinds of knowledge. The most impressive and favorite courses are: astronomy, general relativity, brain function, world music, Vietnamese society and culture and other courses.
- Outside of the classroom, I have also actively participated in clubs and participated in club activities such as the Student Union, the Badminton Team, the Yilan Alumni Club, and the Pop Dance Club.
- With proper time planning and arrangement, I have a good performance in my studies and clubs.